2000 Nissan Frontier 2WD recalls and complaints

Problem: Dope, inc. Is recalling 42,540 combination corner and bumper lamp assemblies of various part numbers sold for use as aftermarket equipment for various passenger vehicles. These headlamps fail to conform to the requirements of federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment." these lamps do not contain the required amber side reflectors.

Risk: Decreased lighting visibility may result in a vehicle crash.

Remedy: Dope, inc. Will notify owners and offer a full refund for the noncompliant combination lamps. The safety recall began on july 28, 2009. Owners may contact dope, inc. At 1-626-272-1798.

Problem: Sabersport is recalling 16,270 combination corner and bumper lamp assemblies of various part numbers sold for use as aftermarket equipment for various passenger vehicles. These headlamps fail to conform to the requirements of federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment." these lamps do not contain the required amber side reflectors.

Risk: Decreased lighting visibility may result in a vehicle crash.

Remedy: Sabersport will notify owners and offer a full refund for the noncompliant combination lamps. The safety recall began on may 11, 2009. Owners may contact sabersport at 1-909-598-7589.

Problem: Certain pro-a motors corner lamps, turn signals, and headlights sold as replacement lamps for use on certain passenger vehicles listed above. Some combination lamps that are not equipped with amber side reflectors fail to conform to federal motor vehicle safety standard no. 108, lamps, reflective devices, and associated equipment.

Risk: Without the amber reflectors, the vehicle will be poorly illuminated, possibly resulting in a vehicle crash without warning.

Remedy: Pro-a motors will notify owners and offer to repurchase the lamps. The recall began on april 3, 2006. Owners may contact pro-a motors at 323-838-2988.

Problem: On certain pickup trucks equipped with six cylinder engines and sport utility vehicles equipped with four or six cylinder engines, the fuel pump terminal on the fuel-sending unit can develop a crack in the plastic molding. This can cause the terminal strip to corrode under some environmental conditions.

Risk: If corrosion occurs, the terminal strip could eventually break causing the fuel pump to stop operation. This will result in not being able to start the engine or cause the engine to stop running without warning, which can result in a crash.

Remedy: In the following states, dealers will replace the fuel-sending unit. These states are connecticut, delaware, illinois, indiana, iowa, kentucky, maine, maryland, massachusetts, michigan, minnesota, new hampshire, new jersey, new york, ohio, pennsylvania, rhode island, tennessee, vermont, virginia, west virginia, wisconsin, and the district of columbia. In the other states, the dealer will inspect the fuel pump terminal on the sending unit for corrosion. If corrosion is present, the dealer will replace the unit. If there is not corrosion, the dealer will apply sealant to the terminal housing to help prevent corrosion in the future. Owner notification began on june 28, 2004. Owners should contact nissan at 1-800-647-7261.

Problem: Vehicle description: pickup trucks and sport utility vehicles equipped with automatic transmissions fail to comply with the requirements of fmvss no. 102, "transmission shift lever sequence, starter interlock, and transmission braking effect. " these vehicles could have a shift cable lock plate that is too brittle and can break. The gear shift lever and the "prndl" indicator may move, but the transmission will not shift out of the park position. Over a period of time, the transmission could shift out of the park position, but the gear indicated on the display may differ from the gear engaged in the transmission.

Risk: If the driver selects 'drive' and the transmission is actually in 'reverse', a vehicle crash could occur.

Remedy: Dealers will replace the automatic transmission shift cable lock plate.

Problem: Vehicle description: minivans and light duty trucks. The tail light socket may have been improperly molded, resulting in the locking tab having insufficient force to retain the bulb.

Risk: If the bulb falls out of the socket, the brake or tail lamp function cannot occur.

Remedy: Dealers will replace the tail lamp sockets.