Recalls ·2009 Toyota Highlander Hybrid 4WD

2009 Toyota Highlander Hybrid 4WD recalls and complaints

NHTSA lists 4 recalls for the 2009 Toyota Highlander Hybrid 4WD; the most frequently affected component is visibility — power window devices and controls. Owners filed 174 complaints, most often about service brakes. Among the 6 model years of this model in the database, 2009 ranks #3 for number of recalls.

Recalls4
Complaints174

Check your own vehicle by VIN at NHTSA →

Recalls (4)

Visibility — Power window devices and controlsCampaign 15V689000 · 22 Oct 2015

Problem: Toyota Motor Company (Toyota) is recalling certain model year 2009-2011 Tundra, Sequoia, Corolla, Corolla Matrix and Scion xB, 2008-2011 Highlander and Highlander Hybrid, 2007 Camry and Camry Hybrid, 2009 Camry and Camry Hybrid, 2006-2011 RAV4, 2006-2010 Yaris, and 2009-2010 Scion xD and Pontiac Vibe vehicles. During the manufacturing of the Power Window Master Switch (PWMS), grease lubricant may have been inconsistently applied to the sliding electrical contacts.

Risk: If the sliding electrical contacts are not protected by lubricant, debris and moisture that get into the switch may cause a short circuit and the switch assembly may overheat and melt, increasing the risk of a fire.

Remedy: Toyota will notify owners, and dealers will inspect the switch, applying a lubricant if no abnormality is found. If abnormality is found, the PWMS circuit board will be replaced, free of charge. The recall is expected to begin December 20, 2015. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is C0M.

Hybrid propulsion system — InverterCampaign 13V396000 · 04 Sep 2013

Problem: Toyota is recalling certain model year 2006-2010 Highlander hybrid vehicles manufactured February 16, 2005, through July 29, 2010; and model year 2006-2008 Lexus RX400h vehicles manufactured February 23, 2005, through December 2, 2008. The Intelligent Power Module (IPM) inside the inverter module may contain transistors that have higher operating temperatures than the solder can support and the transistors may be heat damaged by the solder. If this occurs, various warning lamps, including the malfunction indicator lamp, slip indicator light, brake system warning light, and master warning light, will be illuminated on the instrument panel.

Risk: The vehicle may enter a fail-safe/limp-home mode that limits the drivability of the vehicle. It is possible that the hybrid system will shut down while the vehicle is being driven, causing the vehicle to stall unexpectedly, increasing the risk of a crash.

Remedy: Toyota will notify owners, and dealers will replace the IPM free of charge. Owners may contact Toyota at 1-800-331-4331. Vehicles that had their IPM replaced under recall 11V-342 are not affected by this campaign.

Air bags — Sensor/control module-inactiveCampaign 13V014000 · 16 Jan 2013

Problem: Southeast Toyota Distributors, LLC (SET) is recalling certain models interspersed through model years 2009 through 2013 as follows: model year 2009-2012 Tacoma, 4Runner, Camry, Camry Hybrid, Prius, and RAV4; model year 2009-2010 Avalon, FJ Cruiser, and Highlander Hybrid; model year 2010-2013 model year Corolla, Sienna and Tundra; model year 2009-2013 Highlander and Venza; model year 2012 Prius V; and model year 2010-2012 Sequoia. During modification by SET to include accessories such as leather seat covers, seat heaters or headrest DVD systems, these vehicles may not have had the passenger seat occupant sensing system calibration tested. Without passing the calibration test, the occupant sensing system may not operate as designed.

Risk: If the front passenger seat occupant sensing system is out of calibration, the front passenger airbags may not deploy or they may deploy inappropriately for the passenger's size and position. This could increase the risk of personal injury during the event of a vehicle crash necessitating airbag deployment.

Remedy: Southeast Toyota will notify owners, and dealers will test the sensitivity of the occupant detection sensors, and recalibrate them as necessary. The recall began on March 21, 2013. Owners may contact Southeast Toyota at 1-800-301-6859.

Equipment — LabelsCampaign 09V223000 · 15 Jun 2009

Problem: Toyota is recalling 27,080 model year 2005 through 2010 passenger cars built from september 1, 2005 to may 4, 2009. These vehicles were not equipped with load carrying capacity modification labels which fails to conform with the requirements of federal motor vehicle safety standard no. 110, "tire selection and rims."

Risk: Incorrect load carrying capacity modification labels could result in the vehicle being overloaded, increasing the risk of a crash.

Remedy: Toyota will notify owners and provide them with a new, accurate label to be installed over the inaccurate label free of charge. The safety recall began on august 18, 2009. Owners may contact toyota at 1-888-270-9371.

What owners complain about

Share of the 1 most recent complaints stored for this model year, by component. Owners can list more than one component.

Service brakes1 · 100%
Engine1 · 100%

From owner complaints

Tl* the contact owns a 2009 toyota highlander hybrid. While driving up a hill at 20 mph, the vehicle stalled and the abs, traction control, steering system, and battery warning indicators illuminated. In addition, "stop vehicle in a safe place immediately" appeared on the instrument panel. The contact had to depress…

Service brakes · Jun 2019 · NHTSA complaint record

How this year compares

Recalls per model year for this model.

Related pages

Source

Recall and complaint records from the US National Highway Traffic Safety Administration (NHTSA). A recall listed here may not apply to every vehicle of this model year — always check your VIN with NHTSA or a dealer.