2002 Jeep Liberty 4WD recalls and complaints

Problem: Chrysler (FCA US LLC) is recalling certain model year 2002-2003 Jeep Liberty vehicles manufactured January 9, 2001, to March 28, 2003, 2002-2004 Jeep Grand Cherokee vehicles manufactured February 13, 2001, to May 23 2003, and 2003-2004 Dodge Viper vehicles manufactured November 1, 2001, to June 30, 2004. Due to electrical noise beyond the tolerance of the air bag electronic control module (ECM), a component in the ECM may fail, causing the front air bags, side air bags, and/or seatbelt pretensioners to deploy inadvertently while the vehicle is being operated.

Risk: Inadvertent deployment of the air bags may increase the risk of injury and the possibility of a vehicle crash.

Remedy: Chrysler dealers will replace the air bag control module and side impact sensors as required, free of charge. This recall remedy was applied during earlier recall campaigns of these vehicles under safety recalls 12V527 and 13V040. All owners that have not had the recall repair performed under safety recalls 12V527 or 13V040 are strongly encouraged to have it performed and not wait for the final remedy to be deployed to the field. The recall began on December 29, 2015. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is R06.

Problem: Chrysler Group LLC (Chrysler) is recalling certain model year 1993-1998 Jeep Grand Cherokee and 2002-2007 Jeep Liberty vehicles. The fuel tanks in these vehicles are at risk of failure and leakage in certain rear impacts.

Risk: A fuel leak in the presence of an ignition source may result in a fire.

Remedy: Owners may take their vehicles to dealers and the dealers will perform a free inspection of the rear structure. On vehicles in the recall that are not equipped with a tow hitch, Chrysler will install a Chrysler designed tow hitch free of charge, provided the condition of the vehicle can support proper installation. On vehicles in the recall that are equipped with an aftermarket tow hitch, Chrysler will assess whether the hitch and surrounding areas show evidence of sharp edges or other puncture risks. If so, Chrysler will replace the tow hitch with a Chrysler designed tow hitch free of charge, provided the condition of the vehicle can support proper installation. On vehicles already equipped with a Chrysler designed tow hitch, Chrysler will inspect the area around the tow hitch installation, and if any installation issues are identified, they will be repaired free of charge. The recall began on August 1, 2014. Owners may contact Chrysler at 1-800-247-9753. Chrysler's recall campaign numbers are N45 (for the Grand Cherokee vehicles) and N46 (for the Liberty vehicles).

Problem: Chrysler is recalling certain model year 2002 and 2003 Jeep Liberty vehicles manufactured January 9, 2001, through March 28, 2003, and 2002 through 2004 Jeep Grand Cherokee vehicles manufactured February 13, 2001, through May 23, 2003. A component in the air bag control module may fail causing the front airbags, side curtain airbags, and/or seatbelt pretensioners to deploy inadvertently while the vehicle is being operated.

Risk: Inadvertent deployment of the airbags may increase the risk of injury and the possibility of a vehicle crash.

Remedy: Chrysler will notify owners, and dealers will install a supplemental jumper harness to the airbag control module, free of charge. Owners were notified of the recall by interim letter in January 2013. The remedy for affected Liberty vehicles is expected to be available in April 2013. The remedy for affected Grand Cherokee vehicles is expected to be available later in the year. Owners may contact Chrysler at 1-800-247-9753.

Problem: Timken is recalling certain non-formed, front wheel hubs, part number HA599467, which were sold to retail and automotive distributors in the automobile aftermarket as front wheel hub replacements designed only for use on certain 2002 through 2005, 4X4, non-ABS, Jeep Liberty vehicles. These front wheel hub units can be mistakenly sold to owners and installed on 4X2 versions of the Jeep vehicles.

Risk: If the non-formed hub unit is installed on a Jeep Liberty 4x2 model (which does not use an axle nut for hub retention), the vehicle wheel will not be secure and a front wheel separation may occur, increasing the risk of a crash.

Remedy: Timken has notified retail stores that have received the subject parts. The front wheel hubs will be replaced free of charge. Owners who may have purchased the affected units should contact Timken at 1-330-471-3693 for more information. This recall is being conducted by Timken, not Chrysler/Jeep.

Problem: Chrysler is recalling 42,469 my 2002-2003 jeep liberty vehicles originally sold in or currently registered in salt belt states of connecticut, delaware, iowa, illinois, indiana, kentucky, massachusetts, maine, maryland, michigan, minnesota, missouri, new hampshire, new jersey, new york, ohio, pennsylvania, rhode island, vermont, virginia, west virginia , wisconsin and the district of columbia. The front suspension upper control arm ball joint may experience a loss of lubrication which could lead to corrosion, accelerated wear, and possible separation while driving.

Risk: Failure of the ball joint could result in a loss of steering capability, increasing the risk of a crash.

Remedy: Dealers will replace the front upper control arm assemblies free of charge. The recall is expected to begin on or about april 24, 2010. Owners may contact chrysler at 1-800-853-1403.

Problem: Sabersport is recalling 16,270 combination corner and bumper lamp assemblies of various part numbers sold for use as aftermarket equipment for various passenger vehicles. These headlamps fail to conform to the requirements of federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment." these lamps do not contain the required amber side reflectors.

Risk: Decreased lighting visibility may result in a vehicle crash.

Remedy: Sabersport will notify owners and offer a full refund for the noncompliant combination lamps. The safety recall began on may 11, 2009. Owners may contact sabersport at 1-909-598-7589.

Problem: On certain trucks, the constant tension front lower ball joints may experience contamination. If the vehicle is operated for an extended period with this condition, the ball joint may eventually experience wear and looseness.

Risk: When the driver continues to operate the vehicle with this condition, the contamination can lead to corrosion, accelerated wear and possibly separation from the steering knuckle causing a loss of vehicle steering control increasing the risk of a crash.

Remedy: Dealers will replace the front lower ball joints free of charge. The recall began on september 11, 2006. Owners should contact daimlerchrysler at 1-800-853-1403.

Problem: Certain aj motorsport combination lamps sold as replacement lamps for use on the above listed passenger vehicles. Combination lamps not equipped with amber side reflectors fail to conform with the requirements of federal motor vehicle safety standard no. 108, lamps, reflective devices, and associated equipment.

Risk: Lack of amber side reflectors in the lamps will decrease lighting visibility to other drivers and may possibly result in a vehicle crash.

Remedy: Aj motorsport will notify owners and offer reimbursement for the lamps. The recall began on july 31, 2006. Owners may contact aj motorsport at 626-618-2026.

Problem: Certain ck motorsports combination headlights, clear corner, bumper, and side marker lights sold as replacement lamps for use on the passenger vehicles listed above. Some combination lamps that are not equipped with amber side reflectors fail to conform to federal motor vehicle safety standard no. 108, lamps, reflective devices, and associated equipment.

Risk: Without the amber reflectors, the vehicle will be poorly illuminated, possibly resulting in a vehicle crash without warning.

Remedy: Ck motorsport will notify owners and replace the noncompliant lamps free of charge. The recall began on july 1, 2006. Owners may contact ck motorsport at 1-909-610-7211.

Problem: Certain pro-a motors corner lamps, turn signals, and headlights sold as replacement lamps for use on certain passenger vehicles listed above. Some combination lamps that are not equipped with amber side reflectors fail to conform to federal motor vehicle safety standard no. 108, lamps, reflective devices, and associated equipment.

Risk: Without the amber reflectors, the vehicle will be poorly illuminated, possibly resulting in a vehicle crash without warning.

Remedy: Pro-a motors will notify owners and offer to repurchase the lamps. The recall began on april 3, 2006. Owners may contact pro-a motors at 323-838-2988.

Problem: Certain aftermarket brake hydraulic master cylinders sold as replacement brake cylinders for certain ford, daimlerchrysler, and jeep passenger vehicles. These brake cylinders were sold under the brand names of napa, raybestos, aimco, ac delco, carquest, bendix, and wagner. Only products that were manufactured from july 27, 2005 through january 17, 2006 (date codes 0529 through 0602) are subject to this recall. When subject to very cold temperatures, an internal seal in the master cylinder could lose flexibility and may cause brake fluid to leak.

Risk: Loss of brake fluid can lead to a decrease in brake line pressure and an increase in stopping distance, which can result in a vehicle crash.

Remedy: Affinia (brake parts, inc.) will replace the subject brake hydraulic master cylinders free of charge. The recall began on march 20, 2006. Owners can contact affina group customer service at 1-800-323-0354.

Problem: On certain sport utility vehicles, the lower control arm ball joints can experience a loss of lubrication that can lead to corrosion, accelerated wear, and possible separation from the steering knuckle.

Risk: A ball joint thathas separated from the knuckle could result in loss of vehicle directional control and could result in a crash.

Remedy: Dealers will replace the front lower control arm ball joints with modified assemblies and heat shields on vehicles built between january 2, 2001 and october 4, 2002. On vehicles built between october 5, 2002 and march 26, 2003, dealers will inspect the ball joint assemblies (and replace them as necessary) and install heat shields. Owner notification began on december 15, 2003. Owners should contact daimlerchrysler at 1-800-992-1997.

Problem: Vehicle description: sport utility vehicles. In the event of a severe frontal offset collision, sharp edges on the power steering pressure hose bracket could cut the front impact sensor wiring insulation causing a short circuit in the wiring.

Risk: This could delay the deployment of the air bag system, increasing the risk of injury to the seat occupant.

Remedy: Dealers will wrap the front impact sensor wire harness with protective insulation to prevent the possibility of damage. Owner notification began february 18, 2002. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact daimlerchrysler at 1-800-853-1403.

Problem: Vehicle description: sport utility vehicles. The driver's side knee blocker trim panel assembly can disengage, fall, and startle the operator.

Risk: This could startle the operator, increasing the risk of a crash.

Remedy: Dealers will replace the knee blocker trim panel. Owner notification began november 26, 2001. Owners who take their vehicles to an authorized dealer and do not receive the free remedy within a reasonable time should contact daimlerchrysler at 1-800-853-1403.