Air bags — Inflator moduleCampaign 17V047000 · 20 Jan 2017Do not drive until repaired
Problem: BMW of North America, LLC (BMW) is recalling certain 2000-2002 BMW 320i, 323i, 325i, 325xi, 330i, 330xi, 323Ci, 325Ci, 330Ci, M3, 323iT, 325iT and 325xiT vehicles, 2001-2002 525i, 530i, 540i, M5, 525iT and 540iT vehicles, and 2001-2003 X5 3.0i, X5 4.4i, and X5 4.6is vehicles. These vehicles may have had a driver-side air bag module installed as replacement equipment such as after a vehicle crash necessitating replacement of the original air bag, or as a remedy part for a prior recall. These replacement modules contain an air bag inflator that may rupture due to propellant degradation occurring after long-term exposure to lower absolute humidity, temperature and temperature cycling.
Risk: In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy: Owners are advised not to drive their vehicles until the vehicle has been remedied. BMW will notify owners, and dealers will inspect the driver side air bag module, replacing it as necessary, free of charge. The recall began March 15, 2017. Owners may contact BMW customer service at 1-800-525-7417.
Seat belts — Buckle assemblyCampaign 03V032000 · 04 Feb 2003Problem: On certain passenger vehicles, the connection of the safety belt buckle to the steel rope of the tensioner does not meet bmw specifications. In severe frontal crashes, this connection can detach.
Risk: If the connection detaches, the protection provided by the safety belt is likely to be impaired, and serious injuries to the driver and/or front passenger could occur that might otherwise be mitigated.
Remedy: Dealers will inspect both front safety belt tensioner and buckle assemblies, and if necessary, replace these parts. Owner notification began march 19, 2003. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact bmw at 1-800-831-1117.
Service brakes, hydraulic — Hoses, lines/piping, and fittingsCampaign 03V001000 · 09 Jan 2003Problem: On certain sport utility vehicles, it may be possible for the front brake line to slip out of the retaining bracket located at the front strut. The brake hose that is attached to the brake line could come in contact with the tire and be subjected to wear and abrasion.
Risk: This could initially cause some brake fluid leakage, and eventually lead to a substantial loss of brake fluid. There could be a noticeable reduction in brake performance if a loss of front brake performance occurs.
Remedy: Dealers will install an additional retaining clip to further secure the brake line to the front strut. Additionally, if inspection of any brake hose indicates that it has experienced damage, the hose will be replaced. Owner notification began february 14, 2003. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact bmw at 1-800-831-1117.